Tuesday, May 11, 2010

FIRST SITE VISIT @ PULAU BANDING

ACTIVITY ON 25/4/10

* i forgot to publish this entry...this should be before the Pulau Banding 1...sorry for the inconvenience....


going for a site visit with authorise person form TNBD Ipoh, foreman Shamsul and En. Faris...



went to the site before take any further action...the location is base on the report provided by TNBD Ipoh... ( Location : BS-BG 76)



*Thermography Analysis*

according to contractor, base on their inspection..they found hot spot at overhead line...how they capture the hot spot??? picture above, somthing like camera hold by En. Faris was used to determine the hot spot location... however, hot spot cannot be seen (not really clear) on bright day...


this is the location of hot spot...they did the analysis at night...the joint was on a tray at the pole

this is the scanned picture...above this was the original firgure and this is the result they get and evaluate the level of hot sopt base on the temperature...different location will have different temperatute...as u can see in the picture...the 20 degree C was the references temperature at that surrounding..if there is a spot with temperature high than its references temperature, they will clarify it as hot spot...





short discussion with the boss about what we should do when we come back later....



discussion with foreman Shamsul n En. Faris on how and where to install the energy logger... our first choice to install is at termination.. but since at termination required a shutdowm, it give us a bit problem in order for us to do our job tomorrow..to arrange a shutdown TNB need at least a week to arrange it..they need to give a notice to residences, premise, resort and etc to inform them about the shutdown... if fail to do so, after 10min (usually) of shutdown, TNB will recieve a lots of phone call... =D








No comments:

Post a Comment